This allows mounting a 52mm spindle motor to a linear actuator. I designed this with holes spaced for the SainSmart 100mm Ballscrew Linear Actuator. It may work as is on other hardware, but the source is included in case it does not, so feel free to remix. I am using only one clamp on my machine, pressing the motor against the extrusion directly. Two can be printed to sandwich the motor as well.
- 4 M6x60mm bolts.
- SainSmart 100mm Ballscrew Linear Actuator
- 52mm spindle motor
Folger Tech RepRap 2020 i3
Atomic Filament PLA
Gun Metal Gray
Printed using a 0.8mm nozzle with a Tevo Titan extruder and genuine E3D block and heat-break in a clone heat sink. In order to print properly with such a nozzle size, it is important to limit your volumetric speed to approximately 10mm^3/s. If you were to use a 0.4mm layer height with a 1mm extrusion with, the movement speed should be capped at 25mm/s, per 10/(1*0.4).