I removed the front-top logo from the original model as I would like to display this somewhere and not have an advertisement on it. Smoothed the top to remove the logo and that's about it. Enjoy!
I have also added a couple of files that have supports included into the STL for easy and fast printing. If you're confident in making support material in your slicer, I would recommend that for the larger model, as the supports require pretty precise extrusion and printer accuracy to print properly and stay together. For the smaller model, using supports from my slicer I was able to reduce the time by almost 15% by creating my own supports, but if you aren't feeling up to the task, try out my Supports_HalfSize.stl
The pictured model is scaled down to test if a small version would still be detailed enough to print, so I used a 0.12mm profile at 50mm/s and this is the result! I think it printed beautifully and using Cura's support structures with 5% Gyroid infill and 1 wall line, the supports held up fantastically and removed very easily with little residue on the model! Print took 10.5 hours to print due to quality settings but I'm very pleased with the result!