The original Hotend Cooling of an Creality Cr10 does not have the optimal cooling properties.
In addition, the weight of the Alucovers is not the best solution for vibration damping and also very top-heavy.
That's why I designed this all-in-one printable solution, which is also usable for the original fans.
Component cooling is dual, which improves the layer adhesion and appearance.
Screwholes build for M3 Bolts. Use M3 x 20mm to fix the Coolend.
After print, clean up the Screwholes of the rest of support.
Then you can fix the Coldend without problems.
3D Jake PETG
first layer: 236°C
all other: 234°C
Bed: 55°C (with Buildtak)
Speed: 45 mm / s
Support only on Heatbed