Designed to use with 15x1mm aluminum tubes as barrels. You can get this from Bauhaus or similar stores. (at least in Austria and Germany)
Print with 0,3mm for best strength
Use at least 3 or 4 wall lines when printing HS-Achse7 for extra stability. Rotate it to print it standing so you won´t need supports.
This files are only the spinner and cylinder. For using them with your Hammershot you will also have to print Hammershot_Peg from
3DJake EcoPLA PLA
Cut 7 tubes with 65mm length out of the 15x1mm aluminum tube
optional use a pipe cutter with a washer as replacement for the cutting wheel to create thightening rings for a better dartfit.
glue the tubes to the cylinder
enjoy your modded Hammershot!