This deck box is for the card game Race For The Galaxy with sleeved cards.
Print the box.
To print the lid, do in this order :
1- print the logo (centered on the plate)
2- pull off the external frame
3- change the filament
4- print the lid (centered and with the same orientation than the logo)
I use four cheap magnet 6mm of diameter and 3mm height, and 2 washer of 10mm diameter, all found on Amazon.
I use the technic of MakeAnything https://youtu.be/KV2AjyowXX4
Have fun !
Black and Cyan
The logo is printed at 0.1 layer height