This is a Palette 2 Extruder Tube Clip for the Flexion Extruder. This is to be used with the velcro provided with your Palette 2 on the top face of the stepper motor. The photo does not show the velcro. It is only to illustrate where it should be positioned. Use an M3 screw on the front of the extruder as a hinge/pivot. There is no need to tighten the M3 screw if you are holding the Clip with the velcro.
My stepper motor is very narrow so I have to cut my velcro from 25mm to 22mm wide. I have also included a separate STL file with the wider platform for the original 25mmx25mm velcro if you a using a stepper motor with a longer body.
I have added an additional variant where you can attach the original Palette 2's Velcro Attachment directly. Use the same M3 screw hole as the locator.