This is a switch mount for the Redcat Racing Lightning EPX Pro, Tornado EPX Pro, and Volcano EPX Pro (that have the Hobbywing HW-WP ESC's).
Additional hardware needed:
2pcs: M3x8mm flat head screw
It's best that you have some sort of cushion (or worn out piece of double sided tape) still attached to the bottom of the ESC switch. Just place the printed switch mount around the switch and align the mount with the two holes toward the edge of the chassis, next to the motor. Being careful to not pinch the switch wire, install the screws from the bottom side of the chassis to secure the mount and the switch.
Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles.
In keeping with the non-commercial clause of this license, if you produce this part (Lightning Tornado Volcano EPX Pro Switch Mount.STL) for others, you may not receive compensation in excess of $0.75 per part, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.