Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Or10m4

Pack with improvements and updates for the new Tevo Tarantula Pro.

by Or10m4 Jun 14, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Certain pedon mo eror, I promise you will relax that failure

That's right, these files are made for when the corresponding Kit for the Second Z-axis is released, along with the Second Extruder that will be placed on the Right side.
This is a completely future improvement.
I'm still about to define the sizes of the Fan Duct with a Double Extruder, but until you have that piece in physical I can check the design and make the appropriate adjustments or create a piece to replace the piece that is currently.
Remember that this Pack is designed in all possible modifications that will be made to the Tevo Tarantula Pro, as well as to the existing pieces in case of a breakdown and can be replaced.

Not sure if it is intended or not, but your front right gantry plate is a mirror of the front left. Because of this, your right side files wont work as the right side of the tarantula pro has a single idler pulley rather than a stepper motor. As it stands, with both sides being set up for a stepper motor, there is no where on the front right plate to mount the idler pulley.

That's right, these files are made for when the corresponding Kit for the Second Z-axis is released, along with the Second Extruder that will be placed on the Right side.
This is a completely future improvement.
I'm still about to define the sizes of the Fan Duct with a Double Extruder, but until you have that piece in physical I can check the design and make the appropriate adjustments or create a piece to replace the piece that is currently.
Remember that this Pack is designed in all possible modifications that will be made to the Tevo Tarantula Pro, as well as to the existing pieces in case of a breakdown and can be replaced.

I’m talking about the front gantry plates, they are identical which means you don’t have the hole for the idler pulley on the right side because you have it set up for a second X axis stepper motor. You should have the left plate set up for the X axis stepper, which you do, then the right should be an idler pulley for the right side, not a second X axis stepper.

Attached are photos of the front gantry plates, Left side has the X axis stepper, Right is an idler pulley.

Or be true in the design of the space for the Crazy Pulley, in the following update I promise to solve that small big mistake and so will be due to the design.
Thank you for your contribution