This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kK0Kir0RMW3
Castle Portal (or whatever you want to use it for)
Everything is designed to be printed flat, no needing supports
Steps - the brickwork panels are located around each step box. (see pic above for reference)
- Glue the sides evenly first, all edges of brickwork should be flush to the stepbox.
- Glue the top brickwork to the stepbox, the back should be flush with a lip at the front.
- Glue the front brickwork, sides should be flush with the stepbox and the top of the brick
work sits under the top brickwork lip.
The Pillars.... print 2, turn one upside down and glue together!
will need at least 12-15% infill with 3-4 top layers!
The portal ring has been designed to fit two rows or 5050 LEDs with a controller unit and battery hidden under the large base. - you will need to Dremel a hole for cables if you do!
all parts just superglue together.
This #2 in the series of 3 Portals! - Berko
Portal #1 - https://www.thingiverse.com/thing:3685034
Portal #3 - https://www.thingiverse.com/thing:3686571