Optitrack Motion Capture Flex 13 Camera mounts. Utilizing a gear system to adjust angle of incline, the camera is mounted on the "gear slot" part, where it is held down with a 1/4"-20 screw. From there, the angle is selected and set with screws being set on the perimeter of the gear in order to secure it. Using 1/4" screws, the clamps are placed around a pole (size may be adjusted) and tightened in order to fully mount the camera. Adjustments have been made to the gear slot so it is open on either end. Camera should be mounted on the right side (unlike being mounted on the left, seen in the pictures attached), to allow for camera plugin.
Flex 13 Camera - Side view
Flex 13 Camera - Simple on simple mount
Clamp and Gear mount
Camera Gear Slot mount on Gear