Landing gear to be mounted to the front of my self designed foam board biplane. Simply glue it to the under side and off you go.
They are also bent down away from 90 on purpose to allow for a little spring.
I also made some wheel pants. Just for fun, because all wheels deserve pants. These are designed for a 2" wheel and can be easily mounted in place by gluing the pant to the side of the landing gear and using a one inch 4-40 machine screw as an axle.
For the motor mount, I kept it in a nose down orientation to cut down on support. I did not included any screw holes to keep options for other motors open. Just be careful when you drill out your holes and keep them nice and precise.