Update June 17
Updated the exploded view and step file.
Update June 14, 2019
I replaced all M5 brass inserts with nuts M5 who I like to lock with some epoxy.
Because of that change all parts had to be changed.
For a stiffer design, I added 2x aluminum angle profiles 30x30x1.5 who are epoxy glued to the Y-Top-Plate.
I added an exploded view drawing with BOM
Update June 11, 2019
KRESS Holder and KRESS Clamp now with the right clamping diameter D=43
KRESS routers often used in CNC machines presented in a Z-AXIS setting
The Z-axis has 2x 12mm linear guides what creates max stiffness. The Nema17 stepper motor has an integrated lead screw including a spring loaded bronze anti backlash nut.
STEP file included.
Most probably I will post the whole CNC machine later.
To increase stiffness, the KRESS carrier can be foreseen with a carbon fiber cloth soaked in a resin. (Depends on your need)
3D printed parts made out of nGEN or ABS (PETG would also work)
There is a 3D pdf file included. Double click in the picture and you can manipulate the 3D object including manipulating the part tree. Adobe reader is required. Edge will not show the picture