This is my first project and first upload.
It represents a Power Rangers Dino Charge. The model was created out my son request and I worked using pictures found on the internet as reference, so the size might not be like the real one.
I added an internal LED (5mm) to make some effect and added a button.
The model might need a bit of work after printing to fit the components depending on what you have.
Batteries are standard LR44 and the switch a 6mm momentary push button.
The model was supposed to be provided with a paper printed dinosaur to look more like the original, but the LED effect was sufficient in my case :)
There are two different sides to print, one without holes and one with holes to let more light seeping in through the plastic.
Two buttons are printed because the thin pin is a bit fragile.
I printed all with support.