MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Celtic Cross Necklace/Tree Ornament/Jewelry Piece

by DarkAlchemist Dec 4, 2012
Download All Files

Thing Apps Enabled

Please Login to Comment

Nice overall design, but there is a mistake in the round orb in the center : it is floating above the base of the curved center part. I was wondering why I had free wires running on my print ! Luckily it did not impact the rest too much.

Could you do a screen cap and show me precisely what you are talking about?

Thank you.

Yes, here it is: a view with Cura. As you can see, the knob (or round orb) is floating above the surface in the center.

I am about to upload the revised file. The inner orb is down where it belongs not up on a pedestal/column (the easy way out). After playing around with this file I can say OUCH, what a mess but I finally got it.

WOW, alright I will search a Blu-Ray disc I have and if it is on it I will revise that for sure and let you know when I upload it.

Thank you for this.

Nice! Yes it's much better of course.
You're welcome, thanks for your shared design.

I never ever saw that but that would explain why some people it disappeared on and others it printed. I am not 100% sure where this is at but if I get a chance I will look and see. Been a long time since I made this (over five year now) and I am not really sure what I made it in.

Well if some people use support on your design to print it, the central orb will be printed! Otherwise, just a junk of filament!

You did a terrible project

Lol, why so hateful? Many have printed it and loved it so what you say really doesn't matter.

Troll much?

edit: Ahhhh, a nobody with nothing done by them. Shut up and sit down little boy and when you have done something for everyone to enjoy then you may speak with the adults.

going to try again, getting better at 3d printing, should come out right this time, thanks

Nowadays this is a very easy piece to print but the smaller your nozzle's diameter is the better this print will come out. It was made for a 0.35 so a 0.4 may, or may not, be able to print it 100% but a 0.35,.3,.2 will easily do it.

Hola tengo una imodela, se puede hacer esto con imodela. gracias.un saludo de barcelona

Hola, nunca he oído hablar de un imodela antes de que acaba de mencionar. Por lo tanto, la impresora no tenía ningún problema con esto? Si imprimió le podría publicar en el "Hice un" botón?