Just another PCB holder.
Suitable for easy soldering, smartphone repairing, etc.
Also you need some not printable components for assembly:
- 2x 250+ mm (depending on the required maximum width) 12mm shaft or metal tube;
- 2 x DIN934 M5 nut;
- 1 x DIN934 M6 nut;
- 1 x DIN985 M4 nut (but you can use DIN 934 with thread lock adgesive);
- 1 x DIN912 M6x40 screw;
- 1 x DIN7991 M4x20 screw;
- 2 x DIN933 M5x45 screw;
- 1 x Spring (I used a 40x10 mm spring);
Optional: Use self-tapping screw for insert's.
STEP files for clamps included for easy modding by yourself.
It is necessary to adjust the insert diameters and cap diameter as closely as possible.
Use flexible filament for pads.