I made this support because I had great difficulties with the existing ones: they are too tight for my hotend, although I have checked it has standard measures.
The support ensure a great grip, because it need bolts with nuts for the closure, and can be installed on CR10 also using screws with higher head.
This support has been designed to be suitable to existing fan/bltouch systems. Anyway I give you the ones I have designed as they can be easily installed/uninstalled without removing the others.
Fans must be 40mm.
Probe XYZ Offsets:
bolts & nuts needed:
- for mount & closure: (3) M3x8mm + (2) M3x12mm + (2) M3 nuts
- for bltouch: (1) M3x8mm
- for hotend fan: (4) M3x16mm + (1) M3x12mm + (1) M3 nuts
- for nozzle fan: (4) M3x16mm + (1) M3x12mm + (1) M3 nuts
Give me your feedback. Thanks ;)
Print with supports only from build plate, 20%, 50°
Material: PETG or ABS