This is my first Model, that I wanted to upload here. If you have any suggestion or feedback, please feel free to tell me.
I am quite happy with the model and it was strong enough to hold my big headset of about 250g, while shaking it.
There is a similar model to this one, but I didn't like the way the modular system was built, so I designed this one completely by myself.
It can be found here: https://www.thingiverse.com/thing:2194278
The print itself is pretty easy, the parts with threads should have an infill of about 80 % and a printing resolution of 0.15, so the screws will go in easy.
The other parts should be strong enough with 40 % infill and 0.2 resolution.
I used metal screws, because they are better tolerated and easier to screw in and are pretty strong when a big load is needed.
- M6x40 hex head screws for the modular arms
- 8x M3x10 lens head screws for the clamp_nut with 8x M3 nuts
I'll try to upload an assembly instruction as soon as possible.