Note: I included the Fusion 360 file and the Meshmixer file so anyone who wants to continue this remix in their own ways can do so.
License information: The cryptex design follows the license of Brabus453's Excalibur cryptex: https://www.thingiverse.com/thing:3077123
The Daedric sword hilt follows the license of the Daedric Dagger by Qbatronix that I used to make it: https://www.thingiverse.com/thing:2996429/comments
You need to print all the STL files except the Daedric swords. You can pick either the straight or curved, you don't need both.
The rings are a bit difficult to turn as are - I applied machine grease between the rings and on the cylinder with good results. All in all, this is a functional V1 of this remix, but it works as intended.
I saw the Excalibur cryptex by Brabus453, and I loved the idea. However, I didn't like that the combination was stationary or that the thing was heavily King Arthur themed. So I took the original design, shrunk it down to 50%, removed all the text, re-did the arrow design, made the combination changable by splitting the rings into two parts, turned it into a Skyrim themed Cryptex with Dovahzul combinations and a Daedric sword(with the original blade which is needed to lock right). I optimized a lot for the smaller size(changed the shape of the locking pins on the sword, made the space in the rings larger and so on). Then I went one step further and added a sort of click-snap system so every ring has a resting state, and when you try to turn it, it adds strain, so when it goes back to resting, you get a sort of clicking feedback as it slides into natural position.
PrimaValue PLA PLA
Any amount you feel for, I went for 20%