MRTV review of this model, with ordering instructions and install guide: https://www.youtube.com/watch?v=xl4CpLULKvM
Simple lens protector for Oculus Go / Quest and Rift S. These clip onto the lens adaptor mount and prevents glasses from coming into contact with the headset lenses. Good for when you don't want to add facial interface lens insert to get maximum field of view.
Can be printed in PLA without support or raft. The model should be printed with the wider side (the side that snaps into the headset) facing up.
You can also order these printed by clicking "Order Print" above. The set costs around $10 including shipping.
You can now order this part from Etsy and we will print and ship from US. https://www.etsy.com/listing/722134086/oculus-quest-lens-protector
Otherwise, you can click on 'Order this printed' on the top right.
There are three sizes: Standard should be sufficient for typical glasses for adults. Thick and extra thick are 2mm and 4mm thicker, in case you want extra protection from curved glasses.
Remove preinstalled ring around the headset lenses. Aligning the snap points (tip: look at the removed ring as a guide) and push down. These should go in without much force.
Prescription lens adaptor
You can also print your own prescription lens adaptor for around $30 including lenses and shipping https://www.thingiverse.com/thing:3642004
0.2mm layer height, 0.4mm nozzle diameter
Can be printed in PLA without support or raft. The model should be printed facing down to minimize amount of overhang.