We (the technical course (class 9) of the Herta-Lebenstein-Realschule in cooperation with the Projekt-Akadamie from the IGS-Aurich) designed a model of a pelton turbine.
You will need the following components for assembly:
2 ball-bearings (6x12x4 mm) or you use the simpel rings
18 nuts (M3)
18 screws (M3)
You can use glue (for the axis) or a threaded rod.
1 threaded rod (M5)
2 washers (M5)
2 nuts (M5)
In our other project, you'll see the more complex model.
We wish you a lot of joy with our model.
We would also be very happy about constructive feedback!!!
Take a look at our other projects.