It's been a long time coming, we now have interior orthogonal walls for large curved walls (6x6 * 8x8). This set is a little complex, so be sure to read the instructions.
For instructions on how to get started with OpenForge, take a look at our tutorials.
OpenForge is now a patron supported project. We use the resources that our patrons give us in order to get the resources to let us create more sophisticated tiles with a greater level of detail. Please, support us, and We’ll deliver an ongoing stream of awesome gaming terrain. You can find more about OpenForge and Masterwork Tools at our:
There are 3 basic walls for 6x6 and 8x8. A, B & C. With this set, you would still print the same base, and same wall, but now you also print one or more orthagonal walls that stick out from the curved wall into the round room, and you print out the matching floor. Each of the 6 basic tiles has more than one option for orthogonal walls (2 for A & C, 3 for B).
Grab the wall from:
Grab the base from: OpenForge 2.0 Dungeon Stone Bases
And finally print the orthogonal wall and the matching floors from this thing.
The tiles are in inch square basis (which matches most commercial printed tiles). If you want that size, print without changes, and print one of the inch bases. If you instead want 25mm squares (The historical scale of OpenForge), scale the floors on X and Y or walls on X, Y and Z by 98.4% and print one of the 25mm bases. Finally, if you want wyloch style tiles (1.25" per square) scale the X and Y by 125%.
Note: All bases for OpenForge Dungeon Stone are kept in their own thingiverse entry: OpenForge 2.0 Dungeon Stone Bases
Other Dungeon Stone Tiles
This set was originally designed so I could cheaply expand on my Dwarven Forge tiles from their first Kickstarter. Because of that, the paint scheme I use is designed to make the tiles fit in with the scheme I used on that set. Dwarven Forge has a video showing how to do this paint scheme.
- 2019/05/25 - Added missing low versions