Update: 26/5/2019: Had to fix
Crozius_L.stl because one side of the wings was screwed up due to messed up normals.
This is a mash-up of multiple models from a grimdark future by a certain company that shall not be named.
I don't play any tabletop games, so I went ahead and mixed and matched parts from different variants.
This model benefited from many other awesome models, without which this wouldn't have been possible.
I have test printed this (see the Makes section), and it took around 7 build plates (though this included print failures)
- You need to orient the parts yourself.
- The scale should be 1:1.
- Just print one of each part.
❤ Enjoy the model! Leave a comment, makes, tips, etc if you like it! ❤
❤ Please consider sending tips if you like my printable models ❤
Copyright infringement is not intended. Parts are created freehand in 3D modeling software, no copyrighted product had been scanned or copied in any way. These models are for personal use as proxies and should never be sold. If it causes copyright issues, I will remove it.
On an Anycubic Grey:
Layer Height: 0.04mm
Bottom Layer: 8 s
Exposure Time: 10s
Bottom Exposure Time: 80s
Light-off Delay: 6.5s
Bottom Light-off Delay: 6.5s