Since I'm getting into soldering and stripboard prototyping, and I'm looking to start printing circuit boards, I'm starting to gather a lot of things. I decided that it was necessary to design a storage system for these things, and voila!
Should print well in most filaments, I used PLA.
I have yet to finish printing this, so I'm not sure if the drawers fit perfectly, yet, but they should be fine I gave them some room to move. The drawers are slightly angled.
You may want to consider casting this for resin, lost wax, or injection molding(if you are so lucky), as it's probably a 7+ day print project.
eSUN & Matter Hackers PLA and PETG
I am still in the process of printing this project, it will almost certainly take more than a week for all of the parts. Depending on your print quality settings, it may take up to a week to print the base unit alone. On the upside, once it's printed, if you are comfortable casting, it shouldn't be too hard to make some molds for reproducing it quickly.