Back
Contents
Tags
License
Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagSummary
Donations are welcome!
If you like this "thing" please think about donating. Even if it is only 1 $€£.
It takes a lot of time to design these things and a small donation will motivate me to design more.
https://paypal.me/MG3Desing
Thank You !!!
This design is inspired by https://www.thingiverse.com/thing:3177276 but much smaller.
I printed eveything at 0.1mm but the inserts can also be printed at 0.2mm-
The 8mm insert is a bit tricky to print - use a large Brim to make sure it will print OK.
You could also print Part A&B and the 6mm insert at 133% size to get a 8mm stop.
Printing the 8mm stop at 125% should give you a 10mm stop.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
25%
More from Machine Tools
