Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

mmaiworm

Logitech C170 Camera Holder for Anycubic 4Max Pro

by mmaiworm May 20, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

think this will fit a C270 as well?

I don't know that. I would disassemble the C270 and have a look if it would have the same inner dimensions as of the C170 that you can see on the attached picture.

it almost fits, but not quite. Oh well, nice design though.

Any chance to get a RaspiCam Version? :)

I am afraid the cable of the RaspiCam will not be long enough. So you would either need to drill a hole into the housing of the printer or you would need to install the complete Raspi within the housing which - if it would even fit - I doubt would not be a good idea with regards to thermal reasons.

thx i just printed it. How do you fixed it on the wall?

how have you connect the camera, have you do any hole on the machine for the cable?

  • Posted with 3D Geeks Thingiverse Browser App

No, I did not drill a hole in the machine. I disassembled the wall where the camera hangs and put the cable through the hole of the power switch in the lower right corner. The cable is thin enough to make it through though it fits quite tight.

thnx for the tips

  • Posted with 3D Geeks Thingiverse Browser App

so you assembled back the wall without a problem the cable do not disturb?

  • Posted with 3D Geeks Thingiverse Browser App

See attached photo for how I have done it. The cable fits a little bit tight but it won't damage the isolation. The housing of the printer also fits back in its old position without any play.