This is a Pokemon Cardgame Storage Box!
4 lengths are included in the zip, of arbitrary sizes.
50mm, 100mm, 150mm, and 200mm in length. Same height and width, so they would all stack and store the same card.
We needed a storage solution that was low-cost and fast to print, but versatile. This printed in about 9 hours at standard 0.15 speed on my Prusa MK3, and used about $2.40~ish in material.
They stack! - (The angled base matches angled insert at the top)
They're cheap! - ($2-3 in plastic depending on your material, wall thickness was two perimeters)
They're fast! - (8 hours per)
There's a divider! - (Small divider that fits rails on the inside. Fits snug, doesn't slide on its own)
There's a card slot on front and back! - (Perfectly fits a card for your organizational needs)
They're rigid and robust! - (The rails down the side add a ton of structural stability despite being like 1mm thick..)
Resize this model for your own playing card game and re-upload. Please relink this thing if you do. I understand there are many sizes for many games, and I'm sorry I won't initially support them all. If someone more clever than me wants to remix and cover all games, go nuts. Pokemon cards are 63mm x 88mm, for reference. There is very little play in my design (by design!)
STILL TO DO: Design a lid! Should be simple. :) I will add to this thing later once I do.