This is a Lithopane box that I had originally modeled for my little sister. The photos will show captions above the lithopanes, however the box on here is blank. I have received a ton of interest from people who want to purchase these so to remain fair to them and you, I am only offering a blank .STL file rather than the SLDPRT file with the editable text. This box was designed to fit 3 lithopanes at 100mm tall and 75mm wide and 3.7mm thick. (photos cropped in 4x3 format) This was designed with 3D printing in mind and therefore is made in three parts, the main where the lithos go, the bottom the light goes, and the base. This bottom and the main get joined together with 4 M3x10mm screws, threads are modeled into the main. The base gets glued to the bottom, I also tacked it on with a soldering iron. The bottom has a mounting fixture for a 1" squeeze style candelabra salt lamp fixture. I recommend a LED bulb so it doesn't create much heat, i used a 40-watt equivalent.
4 M3x10mm screws
1 1" candelabra squeeze base
1 30-40-watt equivalent E12 light bulb.
TTYT3D Silk Black PLA, Cheap Natural PETG PLA, PETG