Added left_side_back - Last file, project now done :)
Added a part of left side. last part needs to be designed.
Updated top with the support of a 140mm fan.
Updated the bottom part with space under board mount for 80mm fan cooler for the PSU.
Uploaded top.stl file.
Fan size is 80mm.
Changed back_connector width to 3mm instead of 5mm.
An electric box/case to hold:
- MKS TFT32 touch screen
- Raspberry PI
- Raspberry PI 7" Touch Screen
- 2 Mosfets
Made for GX16 aviation plugs. NOTICE!!! DO NOT use GX16 plugs for power, as they can only handle 4-5amps.
I have used XT60 instead!
The front can be "blanked" or with TFT32 mount.
The left side has not been made yet - to come!
Print as you like the separate parts to be printed!
Glue together bottom part and back/connector part at the bottom. Use align-pins designed to make it fit.
Designed for a 210x210 bed!