Hi all !
I design a UEFA Champions League Cup color in same layer sign.
The files are for a 30x30 bed but SCALE can be done for all files.
Must have a good bed calibration.
Recommend printing on glass for glossy look.
Position the 3 files in exact match position,
for example X = 150mm Y = 150mm, if a part should be moved so there will be no spacing In letters.
Write on Paper your locations.
And just print each file separately.
The first part will be ''CUP'' . one layer (recommend 0.16) --> Z = -0.4
The second part of the ''LOGO'' will be in two layers---> Z= -0.2
again the first part of CUP from layer 0.16 to 0.36
Step 4 :
Then the full part ''Body'' that gives height (TOP and BOTTUM LAYER are not must )
Z start point from 0.36
(It is possible to pre-print the first part CUP in two layers and then STEP 3 redundant.)