This is just a simple screw-top box. It is about 63mm tall and 63mm across.
- v1 - has not changed
- v5 - has 58mm threads to match the new split version
- v9 - 1mm top and bottom better for 0.2mm
A 0.2mm layer height is better for the thread overhangs.
The split version is still a work in progress.
Note: The threads will be very tight, do not force them! The best way to deal with them is to work them a little at a time. Carefully twist the cap on until it sticks, then back off a quarter-turn and repeat. It took me about 5 minutes of doing this to get a perfect fit.
It is important not to go to fast or the plastic will get warm and then stick.
0.2mm, 4 shells, 3 top/bottom