Big shoutout to w0rkfl0w for helping me with test prints ;D
I made this 14.4mm inside. The design is based off of my first one which was alooooot of trial and error. This one went more smoothly though ;)
Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489
More sizes to come. I originally made 8mm and 10mm but was asked to design some sizes up to 14mm ;D
Utilizing print in place one-way bearings. No support needed.
If you have any issues printing please let me know, feedback is key to better designs ;)
If i made a positive impact in your life please support me via paypal :D
Thanks for stopping by, come back soon ;)