NOTE: Open Source project share as much as you want!
Original work by Chad L. Davis (Blackvertigo1) please credit me if possible!
Other than that end user is authorized to share, publish, modify, or make functional this work.
Due to its open source nature you may with no limitation produce this design with commercial intent. Please give me credit in the design though if you wish to use as such.
The specifications are going to be in the comments section for reference.
Mass driver assisted rail-guided cannon.
Enjoy the print!
Overview and Background
This two year project seems to have a milestone and I've finally gotten around to print it out and will provide further recommended components for completion.
Warning: Untested design, suggest scale model for reference expected results!
All other internals/necessary components.
(1.) Rails fit for the block where they would appropriately go in front block opening.
(2.) Mass driver wrapped and fitted snugly into behind the rails.
(3.) 4x 5500mF (200 VAC) 20% peak discharge threshold electrolytic capacitors.
(4.) 36 - 10 AWG electricians wire (for individually connecting components into proper junctions.
(5.) Proper armature (will post separately).
(6.) You will need a lot of super glue for tightly binding most large parts printed.
(7.) Adruino Nano (recommended) for processor.
(8.) Connect mass driver and rail in parallel.
If using this as a functional device please use non-ferromagnetic rails, i.e. Copper, Aluminium, etc.. I would recommend copper rails, about to upload armature component as
to CNC only. Use carbon steel armature sabot and tungsten core dart, optimized for this project. Thank you again. Chad
Upload complete, now finished with mass driver module printout.
Adjusted "fixed" magazine now aligns with interior.
Completed status. Removed "Work In Progress" notification.