Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Samp1er0

case-TL-Smoother with aeration

by Samp1er0 May 13, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Cool design, but the scale of the STL is way off (loads as 750mm wide along the X-Axis).

Actually it looks to me like the scale should be set to 0.10 for X, Y, and Z. I have not printed it though so I cannot be 100% sure, but it certainly looks like it would be 0.10 (or very close to that depending on the shrinkage of the filament being used).

My scale estimation (above) also assumes the TL-Smoothers being housed are 40mmx30mm in size with hole spacings of 30mm and 20mm respectively (ie: holes 5mm from each edge with holes being approx 3mm in diameter). Pretty sure this design also assumes the TL-Smoothers being housed have both of their cable connections facing upwards away from the PCB.

Of course, I am sure this design will fit other sizes of TL-Smoothers provided the scale is changed as needed.

However, If the designer could chime in with the finished dimensions of an actual printed unit, it would be greatly appreciated.

Really nice job on the design overall though!

Many thanks to the designer for sharing!