A lid for ID:3589779, which will allow you to add a switch (6mm thread) and a DC 2.5mm Panel Jack https://www.conrad.de/de/p/tru-components-niedervolt-steckverbinder-buchse-einbau-2-5-mm-1-st-1497959.html (M10) or https://www.conrad.de/de/p/econ-connect-dce5bp-niedervolt-steckverbinder-chassisbuchse-gerade-2-5-mm-1-st-1303454.html (M8).

Please note, that the barreljack versions are only suitable for 80W (6A) versions of the 775-motor.

I've added a version to use with a XT30 plug.
You'll also have to add a MOSFET, since the switch would become too big, if it had to handle the whole load.
BOM for the MOSFET-addon:

• IRFZ44PBF or IRLB3034PBF
• R IN: 1k
• R GS: 15k
• D1: P2000M P600 or similar

UPDATE 2018.06.08 : Today finally the motor arrived and i've realised, that the motor is taller than anticipated. So i added 5mm and a seam.

No

Yes

Adaptive layers: 0.15mm +- 0.05mm

https://youtu.be/wSI4c4zPGUI use support blocker