Since the BLTouch V3 have a new recommended distance from the nozzle-tip/printbed of 9.4mm I designed a new height gauge/adjustment tool to help those of us getting the probe setup just right.
Need to be printed in either 0.1mm, 0.2mm (recommended) or 0.4mm layer height to get the right height. I also recommend 4-5 top layers so that it's "solid" where it counts and it dont wrinkle up.
Double check height after print to ensure your good to go!
(Antclabs "allow" +/- 0.3mm. so anything between 9.1mm and 9.7mm will do)
TronXY X5S (heavily modified)
Polyalchemy Elixir PLA
Due to different slicers behaving and doing stuff differently, and settings do vary from printer to printer use your calipers and double check the total height after printing. It SHOULD meassure 9.4mm!
Antclabs "allow" +/- 0.3mm. so anything between 9.1mm and 9.7mm will do.