A housing for FYSETC 12864 mini lcd display.
Angled 30° for better view and easier access to sd-slot.
Measures according to usersguide, printed and tested before upload.
4 screws M3x12 countersunk
angled bottompart needs to be printed with support
For a version with SD-card reader in frontpanel see my other design:
UPDATE May 12th 2019
Added flat bottomparts in case a flat mount e.g. for 2020 extrusion is needed
The leds are pretty bright so I used a permanent marker (black colour) and painted the inner surface of the frontpart black. Or just use black filament ;)
The part named buttoncover ist optional and can be used to reduce the diameter of the hole for the rotary encoder. This part should be printed with clear filament.
I usually print my parts in ABS but PETG or PLA should do the job too.
When printing with ABS remember to upscale to 101-102% due to shrinking while cooling down.