Cat planter for small plants, shown here with an air plant.
I wanted a little cat planter, but I couldn't really find one I liked. I did eventually find one I liked, but I already had the idea to make one on Inventor. My inspiration for this little planter came from these: https://www.amazon.com/VanEnjoy-Original-Handmade-Succulent-Ornaments/dp/B078JLSFTQ
The measurements are NOT the same, only some of the style. Most details differ from the inspiration. I may make more with different faces, but as of now, only one face has been made.
The planter pictured here was printed on a Prusa MK3S printer using "wood" filament. Print with the legs flat on the ground. I sanded down the stringy bits and any imperfections with a sanding sponge and a file.
I would love to see your makes, so don't forget to upload them!
For printing details, read under "Print Settings".
Prints well with supports touching the base. Make sure legs are flat on ground. Does not need supports inside. I removed supports from the face (a feature in Slic3r). Extra sanding will probably be needed if too many supports are used.