If you love plex as much as I do, print these multi-color single extruder beer coasters!
Great addition for your home theater!
This was my first attempt at multi-color and I wanted to start with something simple. You could easily create more complex designs this way and there may be some more custom coasters coming in the future.
Print part one first, then the second right on top. Set your z-hop on your printer to 1mm for the second print to ensure you don't run into the first one. I printed these in .3mm and .1mm, but I actually think the .3 turned out better (yellow).
If you print a skirt, make sure to remove it before you start the second print.
I used a mix of PLA (orange/yellow) and PETG (black) because that's what I had. Printed right on glass to give it smooth finish, since it prints upside down.