All parts must be printed in TPU flexible material to function properly! I find that Sainsmart tpu gives great results.
The main required part to create first is the Strap. There are two versions of the strap available: "Strap.stl" and "Strap for Module.stl"
The Strap.stl is for use without the lite expansion module on the back of the transmitter. The Strap for Module is compatible with the module. Both of these parts can be used standalone without any other parts required. Recommended print settings is 60-75 percent infill.
This part is able to lock into the strap and hold very tightly. It covers and protects the screen, d-pad, selection-stick, and buttons. It will only work if the strap is installed. Recommended print settings is 40-65 percent infill.
Gimbal_Base.stl (WARNING! THIS PART MUST BE MIRRORED FOR THE OPPOSITE SIDE!)
Topper Recommended 25.5mm stick height.stl
These parts can be printed to protect your gimbals. They attach to the Cover.stl with two M3 screws. You must mirror the Gimbal_Base.stl part for the other side. I mirrored the part within my slicer, right before printing.
Depending on the length of your sticks, you can select the correct topper to accommodate. I am using Topper_Short 23mm and am using the stock sticks.
UPDATE: For the X-Lite Pro stock sticks, use Topper Recommended 25.5mm stick height.stl. The sticks are a few mm taller than the original X-lite.
The toppers require 6 M3 screws to attach the topper to the Gimbal Base.
Here is a youtube video talking a little bit about these parts:
-Chamfered ridge that would catch on the pro gimbal stick end.
Simple antenna holder.stl
-Added more mounting holes for more configuration flexibility.
-Made one end of the cylinder tighter so it will grip a standard whip antenna and now offers a place to put your SMA rubber plug from the x-lite for storage while you're flying.
Screen Mount.stl - Mount for the Boscam Watch FPV Monitor
- this is version 1 and may be updated soon
Screen Mount V2.stl - Mount for the Boscam Watch FPV Monitor
- this is version 2 and has quite a few improvements from the first version. Recommended 100 percent infill.