MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
-Use 4 perimeters
-Before printing please make sure to print the file Testprint-2-2.stl first
-If the hinges are welt together it helps to set a horizontal expansion (Cura) or XY- size compensation (Slic3r) of up to -0.1. Don't go much smaller because it weakens the hinges.
Find your size:
The number at the end of the file name is the length of the belt in milimeters measured from the hooks to the middle (the 3rd) element with the corresponding grooves. In short: The number should be close to your hips measurement. Please measure your hips where you wear your belt. Do not convert your usual belt length because it often turns out to be to short.
You can use the costumizer if you miss your size.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.