Hoop Tie - A Simple Tidy Tie (TPU)
As the name suggests you will need to use TPU or some flexible filament.
This simple thing came about after designing a bracket for a bicycle, using the same hoop system but had extras on, so simplified it to make this hoop tie.
I have uploaded various lengths from 60mm to 300mm.(if you need longer please comment)
The file name tells you how long and how many holes.
for example: Hoop_Tie_150_10_v1 is 150mm long with 10 holes.
Simply wrap around objects pull and slip over knob to hold things togeather.
The Smaller the tie the more fildly it can be, but it should slip on and off with a little be of force.
Width 12mm, Holes 6mm, knob 8mm.
If you print, please post a make and credit where applicable
Want to see cool things like this being printed LIVE 24/7?
Check out: Zombies Maker Space on Twitch!
Please Note the License, anyone found not to be adhering to it with out permission may have action taken against them.
Want to suggest something for me to make next? send me a Message .
Printing this should be straight forward if you have used flexible filaments before.
I printed these at 100% infill with iron on(cura) as it seems to join the top with the walls better and no supports needed.