I designed this power outlet to bolt to the back of my Folgertech FT-6 in order to add extra 110v outlets to be powered off of the main switch so that all accessories power off of the main switch. It should work universally but I designed it to be much smaller than a traditional outlet. You will have to trim the top and bottom of the original mounting tabs on your outlets to fit it into the box and the mount with M4 hardware and nuts from the front rather than the center like normal outlets. The whole assembly mounts using M3 hardware with six holes. there are vents on the bottom for heat as this covers the stock rear vent on the FT-6.