Gear bunny based on emmit's "Three Heart Gears" openscad script & stanford bunny. Hardest part was figuring out an axis/positioning for the gears that didn't cut off bunny ears.
Minimal supports may be needed for the bunny ears, depending on your printer.
After you print the bunny, be sure to print some geared eggs to complete your set!, and please post your makes!
Printed w/ cura's variable layer height enabled which for this model ended up printing most of the bunny at 0.06mm... severe overkill and resulted in some extrusion issues since still experimenting with settings for this filament.