This is a configurable coat hook. You can stick the 48mm version onto the side of an Ikea Kallax using Tesa Powerstrips and create a coat hanger for your kids.
You can configure:
- The number of hooks and their distance
- The width of the hook, the hooks angle and tip radius
- The width of the corner the hook is attached to, the thickness of the corner
- The printing orientation
- a single hook works "on the side" without support material / raft if you have good adhesion.
- "45 degrees" might need some support material and a raft, but is probably the only choice if you have more than 2 hooks
Check out my other customizable creations!
If you print a hook, please share a picture using the "post a make" button.