This remix is for us that might not use the RepBox, but our own solutions with some more room to spare. Or you can fit 4 rolls instead of 5 in the RepBox if you use the big rolls.
RepRewind remix for 88/90mm Spool size (Prusa Spools, PM and so on)
I really liked the compact version of the spool re-winder. But most of my rolls would´t fit on it (1kg PM/Prusament or the locally available brand). Those are wider than the original RepRewinder could support, so this is just a basic remix of making the centre screw a bit longer and the support bits to match.
In the example image you can see difference between the two. Tweaked parts in Yellow, Rest the are from the original version.
All other parts are identical to the original RepRewind design.
*Credit to RepRewind. Same settings apply to these parts.
All parts can be printed out of PLA, although PETG is recommended (Except for the Spring). Parts are printed without supports EXCEPT the side brackets. You'll need support on from the build plate. Three perimeters and 15% rectilinear infill minimum recommended on all parts. Spring should be >50% infill.