This is a design of a paper towel holder, made specifically for that of the 11-inches tall dining paper towel. The simple and functional design, as well as that of the minimalistic look, will be the perfect addition to that of any dining table and kitchen.
How To Use/Assemble
- The design overall works as a box container that you will put a roll of paper towel in. At the bottom and the cap of the holder, there are round columns that will fit into that of the paper towel tube, allowing to the tube itself to roll when a paper towel is taken and used. There is a small gap on that of the body itself that will let the paper go through, allowing for usage without opening the holder. The design also features a cap/top that you can place as well as remove from that of the container overall, allowing you to replace the paper towel easily as well as preventing dust from entering the holder.
- There are two ways that you can print that of the body of the holder itself. If your printer's maximum print size is more than 9.9″x 7.8″ x 5.9″, you can print the complete body of the holder without any further gluing/finishing process needed, along with that of the cap itself. If your printer's maximum print size is less than that, you will have to print each half of the body of the holder overall, one contains a gap for paper towels, and one does not. You will then have to connect each half together through a bonding glue (Gorilla glue or all-purpose glue is recommended). The cap also has to be printed separately.
- Given that of the fact that the design contains a vertical as well as many round parts, the use of supports and rafts is a must.
Custom Choice of Color
Overview and Background
Half Body 1
Half Body 2
Lesson Plan and Activity
Making By Sharing
Hope You Enjoy This Design :)