MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Halo Reach Sniper Rifle

by TheApropalypse Apr 17, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Could you add it as one ot sliced model? want toprint it for my action figure

Thanks a lot for the model.
I print it at 50% for my grandson (6 years old). It's a little bit small, because i didn't see your model was 80%...(i thought it was 100%..)
Doesn't matter, it's still very nice !
I make a hole in the scope to aim for, and add a piece to have the good angle for the feet.
I didn't find PVC tube in the good diameter, so i print it in horizontal (it's more solid)
it is still necessary to sand and paint, but the result is very funny.
Printed in 0.3 for the 3 big pieces and scope, and 0.2 for the rest.

Is there a chance I can know what scale you used to make it 1:1 and the size pipe you used on the 1:1.

The model included doesnt lend itself to 1:1 that great but i used 130% for a close to fullscale print i believe i used 1 inch and 1 1/4 inch pvc

Very nice and realistic! Thanks for the model!

Could you make the files separate instead of all them in one. I would like to print the rifle to full scale but my print bed is not big enough

What slicer are you using ? You should be able to break up the model into seperate parts in the slicer

I'm using Cura 4.0.0 im newer to the software and am not sure how to break up the model's

if your unable to do that in cura ( I dont use cura so i dont know if it can be done in there) but you can split it up in 3d builder the default progam on all windows 10 computers, just load up 3d builder and select the object, and click undo.