EDIT: just updated the peg, it should fit now.
I highly suggest PLA
This is a 90 degree (more like 120 degree) spatula mod for the CR-10's default spatula. Its got great grip, its strong and you get nice leverage. See picture.
• Place peg in bottom of handle
• Put the other end through the spatula hole
• Slide the bottom cover on
Notes: Print the peg at 100% infill, might as well, since its only gonna cost a minute more of your time from 20%. Also you can print all objects as they are imported. There is a very small spot on the handle where it has to bridge, so you may get some minor loose strings of filament, just snip them off.
Print times: Main handle ~4:30-5 hours, Peg ~10 minutes, Bottom cover ~30 minutes