A lamp shade made to hang from most generic/basic household lamp sockets.
Lamp light socket
-A zip-tie if the clamp is a bit loose at the top
-Remove light bulb
-Feed light socket and cord through the top of the lamp shade
-Place the two halves of the clamp assembly in position just above the base of the socket, and aligning openings over switch. (you may have to unscrew a twist style switch)
-Slide the lamp shade over the two halves of the clamp
-secure top of clamp with a zip-tie if needed
15-20% support infill.
Use 4 layers for top and bottom shells
Print like a vase
Supports: From bed only. Around base/vent holes
Use a brim for added adhesion