3D-Print your own (1.75mm) filament!
Please see other comunity makers "makes" they are truly incredible!
Please see the video for more information, and a proper look at these prints - The pictures don’t do the colors justice!:
Its sounds crazy, but it works! This technique will allow you to create one offs, and to color match your 3D-prints.
It works by changing the filament (and the color) of your filament while printing, and this causes a multi colored filament, that can be printed again to archive a homogenic-color.
Use 100% infill and turn off combing! – I’m still working on Slicer settings, since I still get wired travels in the middle, that make my filament less consistent. -Please share your slicer settings if you find something that works well!
When printing with the 3d-printed-fillament, you need to increase the flow, I had to increase it to 150%, but this number will vary from printer to printer, some experimenting is required.
There are 2 STLs, one that gives you around 7g of material, and one that gives you 30g.
Both are designed around a ~200x200mm print bed.
Update, added a ø110mm version for smaller 3d printers, it gives around 10g of meterial.-
This version is NOT tested! Update: thanks to Jepler this one is tested and confirmed working!
Thanks to All3DP for featuring this model on their website, check out their article here
Added a ø290mm version for 300x300 printers- This one is not yet tested.
Side note: If anyone need a custom sized filament for larger or smaller print beds, feel free to request it in the comments, and i'll upload one as soon as possible!
Check out _Icaruses insane Write-up and testing, he achieved some truly amazing results, Click here to find out more
Check out my social media for sneak peaks and memes: